Page 1
Features added or changed as a result of fi rmware updates may no longer match the descriptions in the documentation supplied with this product. Visit our website for information on the updates avail- able for diff erent products: http://www.fujifilm.com/support/digital_cameras/software/fw_table.html BL00005021-200...
Page 2
Contents X-T3 fi rmware version 2.10 adds or updates the features listed below. For information on earlier versions, visit the following website. http://fujifilm-dsc.com/en/manual/ X-T3 Description Ver. The chosen value is now displayed when a color tem- 10, 12 1, 2 2.00...
Page 3
Changes and Additions Changes and additions are as follows. X-T3 Owner’s Manual: Ver. 2.00 The Electronic Viewfi nder ALL-Intra When a color temperature is selected for white balance (X‐T3 Owner’s Manual 108), the chosen value now appears in the display.
Page 4
X-T3 Owner’s Manual: Ver. 2.00 The LCD Monitor 12800 When a color temperature is selected for white balance (X‐T3 Owner’s Manual 108), the chosen value now appears in the display. The camera now displays a “charging” icon when powered via USB or by the AC‐9VS AC adapter supplied with the VG‐XT3...
X-T3 Owner’s Manual: Ver. 2.00 F-Log/HLG RECORDING Choose the destination for F‐Log and HLG (Hybrid Log-Gamma) movies shot while the camera is connected to an HDMI device. Option Option Description Description The footage is processed using fi lm simulation and both b P Y P saved to the memory card and output to the HDMI device.
X-T3 Owner’s Manual: Ver. 2.10 COPY • Copying ends when the destination is full. • If you attempt to copy a fi le over 4 GB in size to a memory card with a capacity of 32 GB or less, copying will end and the fi le will not be copied.