Installation - Samus SC622G5 Manual

-Packaging (bags, polystyrene, nails, etc.);
-the appliance itself, immediately after use of the oven or gill due to the heat generated;
-the appliance itself, when no longer in use (potentially dangerous parts must be made safe).
Avoid the following:
-touching the appliance with wet parts of the body;
-using the appliance when barefoot;
-pulling on the appliance or the supply cable to unplug it from the electrical outlet;
-improper or dangerous operations;。
-obstructing the ventilation or heat dissipation slot;
-allowing power supply cables of small appliances to come into contact with the hot parts of the appliance;
-exposing the appliance to atmospheric agents such as rain, or sunlight;
-using the oven for storage purposes;
-using flammable liquids near the appliance;
-using adapters, multiple sockets and/or extension leads;
-attempting to install or repair the appliance without the assistance of qualified personnel.
-WARNING: Accessible parts may become hot during use Young children or infirm persons should be kept
away.
Qualified personnel must be contacted in the following cases:
-installation (following the manufacturer's instructions);
-when in doubt about operating the appliances;
-replacing the electrical socket when it is not compatible with the appliance plug.
Service Centers authorized by the manufacturer must be contacted in the following cases:
-If in doubt about the soundness of the appliance after removing it from its packaging;
-if the power supply cable has been damaged or needs to be replaced;
-if the appliance breaks down or functions poorly; ask for original spare parts.
You must do as following:
-only use the appliance to cook food and nothing else;
-check the soundness of the appliance after it has been unpacked.
-disconnect the appliance from the electrical mains if it is not functioning properly and before cleaning or
performing maintenance.
-when left unused, unplug the appliance from the electricity mains;
-use oven gloves to place cookware in the oven or when removing it.
-Always grip the oven door handle in the centre as the extremities of the same may be not due to any hot air
leaks.
-make sure the knobs D and C are in the "●" position when the appliance is not in use.
-after disconnecting it from the mains when you decide not to use the appliance any longer.
-the manufacturer may not be held responsible for any damage due to: incorrect installation, improper,
incorrect and irrational use.
-If the power cord is damaged, it must be replaced by the manufacturer or a qualified service engineer to avoid
any risks to safety.
-The appliance is for indoor use only.

Installation

The appliance must be installed only by a qualified person in compliance with the instructions
provided. The manufacturer declines all responsibility for improper installation which may harm persons and
animals and damage property.
27