Table of Contents
Advertisement
12. LED LIGHTING
The lighting of this hood is produced by two LED modules (included).
Do not touch lamps during or soon after operation. Burns may occur. Cannot be replaced by any other type of light
bulb or LED module.
13. REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS
Remove protective plastic film covering filters before installing them.
Reinstall grease drip rail. The illustration at right shows how to reinsert the grease drip
rail into the range hood.
It is recommended to install side filters first and finish with middle one(s).
1.
Insert one end of the filter into the upper channel of the hood.
2.
Raise the other end towards the inside of hood and insert in the grease drip rail
of the hood.
WARNING
!
CAUTION
12
HD0586
1
2
HD0587
Advertisement
Table of Contents
