1. Manuals
  2. Brands
  3. Broan Manuals
  4. Hob
  5. E64000LC SERIES
  6. Installation instructions manual

Broan E64000LC SERIES Installation Instructions Manual

Hide thumbs Also See for E64000LC SERIES:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION INSTRUCTIONS
HB0072
E64000LC SERIES
INTENDED FOR DOMESTIC COOKING ONLY
!
!
READ AND SAVE THESE INSTRUCTIONS
INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER.
HOMEOWNER: USE AND CARE INFORMATION ON PAGES 13 & 14.
Broan-NuTone Canada ULC, Mississauga, Ontario www.broan.ca 877-896-1119
REGISTER YOUR PRODUCT ONLINE AT: www.broan.ca
21242 rev. 01

Advertisement

Table of Contents
loading

Related Manuals for Broan E64000LC SERIES

Summary of Contents for Broan E64000LC SERIES

  • Page 1 INTENDED FOR DOMESTIC COOKING ONLY READ AND SAVE THESE INSTRUCTIONS INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER. HOMEOWNER: USE AND CARE INFORMATION ON PAGES 13 & 14. Broan-NuTone Canada ULC, Mississauga, Ontario www.broan.ca 877-896-1119 REGISTER YOUR PRODUCT ONLINE AT: www.broan.ca 21242 rev. 01...
  • Page 2 Use an appropriate make-up air device or open a window close to or in the kitchen. 10. To reduce the risk of fire and electric shock, the Broan Elite E64E Series hood must be installed with one Broan exterior blower model 331H, 332H, 335 or 336;...
  • Page 3 ORIZ IGHT ORIZ DAPTER AMPER 3¼" 10" SUPPLIED WITH SINGLE BLOWER HOOD 4½" 18½" DAPTER SUPPLIED WITH E64000LC SERIES HOOD DOUBLE BLOWER HOOD (1100 OUBLE LOWER (600 INGLE LOWER RMP SERIES BACKSPLASH TAINLESS TEEL WALL COVERING WITH WARMING SHELVES PTIONAL...
  • Page 4 HLB3 (280 ODEL LINE LOWER 8" 10" INCLUDES ONE ROUND TRANSITION ODEL (10" R OUND ECTIONS E64000LC SERIES HOOD 332KR LINE AND XTERIOR LOWER OUGH SUPPLIED WITH HOOD RMP SERIES BACKSPLASH TAINLESS TEEL WALL COVERING WITH WARMING SHELVES PTIONAL HL0098...
  • Page 5 The Broan Elite E64000LC Series range hood includes many configurations: hoods with single or double internal blowers (included with the hoods), or hoods using external blowers. For hoods using external blowers, the Broan Elite E64000LC Series must be installed with in-line blower models HLB3, HLB6, HLB9 or HLB11, or exterior blower model 331H, 332H, 335 or 336 only.

  • Page 6: Prepare The Installation

    2. PREPARE THE INSTALLATION WARNING When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves. NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the manufacturer. Make sure that the following items are included: - Range hood - Accessories:...
  • Page 7 2. PREPARE THE INSTALLATION ( CONT’D Cut-out the openings for duct (A) and power cable (B), in cabinet or wall, according to the direction of discharge chosen. See figures below. NOTE: For all internal blower hoods, the cut-out opening for house wiring can be made in cabinet bottom OR wall, no matter the discharge chosen (vertical or horizontal).

  • Page 8: Remove The Adapter

    4. REMOVE THE FILTERS AND THE GREASE DRIP RAIL NOTE: For 36” and 42” wide double blower hoods, the adapter is taped on top of the filters. Remove adapter and set aside before removing filters. A. Remove tape on filters. Remove filters from hood and set aside.
  • Page 9 6. CHOSE THE OPENING(S) (INTERNAL BLOWER HOODS ONLY) Remove the knockout for the chosen opening(s) (horizontal at the back of the hood or vertical on top). See illustrations below. ERTICAL DISCHARGE ORIZONTAL DISCHARGE HR0021 Punch out the appropriate electrical knockout hole on top (A) or back (B) of the hood.
  • Page 10 7. HORIZONTAL DISCHARGE INSTALLATION (INTERNAL BLOWER(S) ONLY) (CONT'D) Slide the blower to disengage its flange from the retaining bracket. HD0270 Flip the blower and engage its flange in the back wall retaining bracket. Using a 5/16" socket and the screws previously IGHT OUNTING removed, secure the blower to the hood.

  • Page 11: Install The Hood

    9. INSTALL THE HOOD (ALL BLOWERS) INTERNAL BLOWER: Run power cable to installation location. Remove wiring cover and place the hood in its location. Mark the position of the screws (smaller part of the key holes [A]) with a pen. Remove the hood and install the four 1/2" double thread screws at marked positions, leaving a 1/8"...

  • Page 12: Led Lighting

    12. LED LIGHTING The lighting of this hood is produced by two LED modules (included). WARNING Do not touch lamps during or soon after operation. Burns may occur. Cannot be replaced by any other type of light bulb or LED module. 13.

  • Page 13: Operation

    14. USE AND CARE Baffle Filters The baffle filters should be cleaned frequently. Use a warm detergent solution. Wash often if your cooking style generates a lot of grease— like frying food or wok cooking. Remove baffle filters by pushing them towards the back of the hood and rotating them downward. Baffle filters are dishwasher safe. Allow filters to dry completely before reinstalling them in the hood.

  • Page 14: Warranty

    IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. During this one-year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service.

  • Page 15: Wiring Diagrams

    17. WIRING DIAGRAMS Broan Elite E64000LC Series Internal blower(s) hoods USE ONLY WITH APPROPRIATE NEON MAKE-UP AIR SYSTEM BLOWER MOTOR ORA ORA 9408 FAN SWITCH A A A A MAIN SWITCH THERMOSTAT LINE NEUTRAL GROUND LED CONTROL COLOR CODE BLACK...

  • Page 16: Service Parts

    Any third party replacement part used may cause serious damage and drastically reduce the performance level of your unit, which will result in premature failing. Broan-NuTone recommends to contact a...

Table of Contents