Table of Contents
Advertisement
T
roubleshooting
Low Suction
Possible causes
1.
Dust Bag is Full
2.
Wand is not installed properly
Poor Pick Up
Possible causes
1.
Brush not adjusted to the proper height
2.
Brush is worn out
Vacuum motor is not working
Possible causes
1.
Vacuum is not plugged in
2.
Electrical outlet doesn't work
3
Vacuum hose may be clogged
No Suction
Possible causes
1.
Vacuum is not plugged in
2
Vacuum hose is clogged
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-855-544-7336.
WARNING:
to reduce the risk of fire, electric
shock, or injury,turn power
off and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
Remedies
1. Replace Dust Bag
2. Secure the wand properly to ensure no air leaks
Remedies
1. Adjust the height adjustment to confirm you're at the right
carpet height
2 Brush might need to be replaced
Remedies
1. Check to make sure vacuum is plugged in properly
2. Check electrical source
3. Check to make sure the vacuum button is ON
4. Check for any air flow obstructions
Remedies
1. Check to make sure vacuum is plugged in properly
2. Check for clog in hose
9
Advertisement
Table of Contents
