Table of Contents
Advertisement
M
aintenance and care
Removing and Replacing Dirt Bag
1. unlock the vacuum cover from the base of
the vacuum.
2. Remove the hose from the intake of the vacuum.
3. take the sides of the vacuum bag and fold
the ends together. Pull on the cardboard
tag which will seal the bag.
4. to insert a new bag: open the bag and
make sure to pull on the sides of the bag
to "puff" it up.
5. slide the cardboard tag on the bag into the
slots within the canister until bag is secure.
To Adjust the Suction Power and Noise level
1. the suction power/noise level button is
located next to the on/off switch on top of
the vacuum.
2. Push if you would like to increase or
decrease suction power which will also
increase or decrease the volume of the
vacuum.
WARNING:
to reduce the risk of fire, electric
shock, or injury,turn power
off and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
7
Advertisement
Table of Contents
