Table of Contents
Advertisement
Operations
Control panel
01
01 Cycle Panel
02 Display
03 Water Level
04 Wash Time
05 Rinse Times
06 Spin Speed
07 Delay End
08 Soak
09 Activ Dual
Wash
10 Temp.
WA8700K(HEATER)_DC68-03520W-02_EN.indd 29
11
12
Press to select a cycle.
Displays the current cycle information and estimated time remaining,
or an information code if the washing machine needs to be checked.
Press to change the water level manually.
Press to adjust the wash time between 6 to 50 minutes or press and
hold to start wash cycle only.
Press to change the number of rinses (maximum 5 rinses) or press
and hold to start rinse cycle only.
Press to select a different spin speed or press and hold to start spin
cycle only.
Press to finish the wash at a specified time. To cancel the Delay End
settings, simply turn off the washing machine. You can set the Delay
End time up to 24 hours.
Press to add soaking time at the start of a cycle for better stain
removal.
This button provides two options, and is available only when the
washing machine is stopped or in standby.
•
Water Save (default): Select to reuse water remaining in the tub
after using Water Jet. The water will be used for the main cycle.
•
Drain: Select to drain water that remains after using Water Jet.
When draining is complete, the washing machine switches to
Water Save mode automatically.
Press to toggle between two different water temperature options.
• Cold: For brightly colored, very lightly soiled items.
• Hot: For colorfast items.
02
03
04
05
07
08
09
10
06
English 29
2018-05-15
5:43:37
Advertisement
Table of Contents
