Table of Contents
Advertisement
Operations
Cycle
TUB CLEAN
Special features
Child Lock
Child Lock is designed to prevent accidents by children or infants, such as drowning.
1. Press Power.
2. To activate the Child Lock, hold down Wash Time and Rinse Times simultaneously for 3
seconds. The indicator blinks.
3. To deactivate the Child Lock, hold down Wash Time and Rinse Times simultaneously
for 3 seconds. The indicator turns off. If the tub has contained water, simply restart the
machine and hold down two buttons simultaneously for 3 seconds to deactivate the Child
Lock.
With the Child Lock enabled
•
You can still manipulate on the control panel while the door is closed. If you open the
door, an information code (CL, dC) appears with an alarm. Then, the machine starts forced
draining after 30 seconds in order to prevent infant or child accidents such as drowning.
•
Only when water supply is complete, the Child Lock becomes active.
•
If the door leaves open for 30 seconds with the tub containing water, the machine drains
the water with the "CL" code, which you cannot stop.
•
To add detergent or more laundry in the tub, or to change the cycle settings, you must
first deactivate the Child Lock.
32 English
WA8700K(HEATER)_DC68-03520W-02_EN.indd 32
•
Select this to clean the tub. The powerful spinning force
removes impurities and bad odors from inside the tub.
•
A blinking
reminds you that it is time to clean the tub
using Tub Clean. For details, see the Cleaning section in this
manual.
Description
2018-05-15
5:43:38
Advertisement
Table of Contents
