Operations
Control panel
01 Cycle Selector
02 Display
03 Delay End
04 Temp.
05 Spin
06 Extra Rinse
07 Prewash
Untitled-2 35
02
01
Turn the dial to select a cycle.
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
NOTE
The actual washing time may differ from the estimated time initially
displayed on the control panel upon cycle selection.
Delay End lets you set the end time of the current cycle. Based on your
settings, the start time of the cycle will be determined by the machine's
internal logic. For example, this setting is useful for programming your
machine to finish a wash at the time you normally return home from
work.
• Press to choose a preset unit of hours.
Press to change the water temperature for the current cycle.
Press to change the spinning speed for the current cycle.
• Rinse Hold (No indicator): The final rinse process is suspended so
that the laundry remains in the water. To unload the laundry, run a
drain or spin process.
-
To use the Rinse Hold option, press Spin
the Spin option indicators turn off.
• No Spin
: The drum does not spin after the final drain process.
-
To use the No Spin option, press Spin
option indicator ( ) turns on.
Press this button to add additional rinse cycles.
This will add a preliminary washing cycle before the main wash cycle.
06
07
08
03
04
05
repeatedly until all
repeatedly until the
09
12
10
13
11
English 35
2023-12-27( )
4:42:13