Table of Contents
Advertisement
Before you start
Prewash (Water Jet & Built-in sink)
Water Jet and Built-in sink help you hand-wash before the washing machine starts operation.
Water Jet is available only when the door is open and the water level set to less than High.
For prewashing, use the Built-in sink that is designed for hand-washing.
CAUTION
•
Do not excessively use Water Jet. Excessive use of Water Jet increases water
consumption.
•
Gently run water into the tub. Otherwise, water may overflow.
WA8700K(HEATER)_DC68-03520W-02_EN.indd 21
1. Press the release lever on the middle of
the door. Put laundry in the Built-in sink.
2. Press Water Jet to supply water to the
Built-in sink, and then hand-wash.
3. When done, you can either reuse the
water for the main cycle or simply drain.
•
To reuse the water, gently lift up the
Built-in sink to drain water into the
tub.
•
To drain the water, press Activ Dual
Wash, and then select Drain.
NOTE
•
If you want to hand-wash while the
washing machine is operating, press
START/PAUSE to stop operation, and
then follow steps 1-3 above.
•
If you open both the door and the Built-
in sink, manually lower the Built-in sink.
English 21
2018-05-15
5:43:36
Advertisement
Table of Contents
