Case Of Problems, And Conceivable Causes And Remedies; The Starter Does Not Crank Or Cranks Slowly, Resulting In Start Failure; Table 11-1 The Starter Does Not Crank Or Cranks - Mitsubishi S6R2 Operation & Maintenance Manual

Chapter 11 TROUBLESHOOTING
Case of Problems, and Conceivable Causes
and Remedies
The Starter Does Not Crank or Cranks Slowly,
Resulting in Start Failure
Table 11-1 The Starter Does Not Crank or Cranks Slowly, Resulting in Start Failure
Cause
Faulty wire connection
Insufficiently charged battery
Electrical
system
Faulty battery
Faulty starter or starter relay
Oil viscosity too high
Lubricating
system
Excessive oil
Rapid wear of sliding parts, or
Basic engine
locked
Note: The table above also include the parts Mitsubishi Heavy Industries, Ltd. does not supply. For the parts Mitsub-
ishi Heavy Industries, Ltd. does not supply, inspect and maintain them following the manufacturer's operation
manual.
11-2
Check the DC fuse.
Check wiring connection between battery, starter and starter
switch
Check alternator. (Refer to P8-24)
Check and adjust belt. (Refer to P8-2)
Check specific gravity of battery electrolyte.
Charge battery
Change battery.
Consult a dealer of Mitsubishi Heavy Industries, Ltd.
Use appropriate engine oil.
Check amount of engine oil and lubrication system.
9)
Consult a dealer of Mitsubishi Heavy Industries, Ltd.
Remedies
(Refer to P8-23)
(Refer to P5-1)
(Refer to P3-