Operating Instructions - Curtis IntelliFresh G4GEMXSIFT30x Instructions Manual

OPERATING INSTRUCTIONS

Brewing Instructions
WARNING - TO AVOID SCALDING, AVOID SPLASHING. Keep body parts clear of the brewer during
NOTICE - Only use GEM3XIFT IntelliFresh
The G4 GEMX Intellifresh brewer is factory preset for optimal performance.
The brewer should be ON.
switch. "Ready to brew"
should be on the display.
4
into the brew rails under the
control panel. Slide it all the
way back until it stops.
The brewer will brew coffee based on the settings programmed into the universal control module (UCM). To
change the settings, see the PROGRAMMING GUIDE section.
® satellites on GEMX ™ series IntelliFresh brewers.
Place an empty IntelliFresh
satellite under the brew
basket. Make sure the
satellite is pushed all the way
back against the front cover
and is making contact with
the electrical socket.
appropriate brew icon. As
soon as you hear the click
of the brew valve, lift your
3
into the brew basket. Fill with
the proper amount of ground
coffee. Level the coffee in the
6 If a keypad appears on
the display, the brew code
feature is enabled (default
is off). Brewing will start
immediately after you enter
the brew code. See the
PROGRAMMING GUIDE to
set up/disable the brew code.
OI51
C