Curtis IntelliFresh G4GEMXSIFT30x Instructions Manual page 19

PROGRAMMING GUIDE
Brew Settings Menu (cont.)
Pulse Brew -
reaches brewing temperature.
Setting Description
A Toward the beginning of brew cycle: 4 cycles of 10 seconds on and 10 seconds off, then on until end of brew cycle.
Starts towards ends of brew cycle. 4 cycles of 10 seconds off and 4 cycles of 10 seconds on. Ends when brew
B
cycle ends.
C Starts at beginning of brew cycle. 5 cycles of 25 seconds on and 20 seconds off, then on until end of brew cycle.
Manually set. Starts at beginning of brew cycle. Number of pulses is adjustable from 1 to 12. Pulse on time and off
D
time are both adjustable from 5 to 150 seconds.
Manually set. Starts at beginning of brew cycle. Number of pulses is adjustable from 1 to 12. Pulse on time and off
E
time are both adjustable from 1 to 150 seconds.
Pulse Brew Guidelines
•
•
•
• Settings D and E are manual pulse counts.
By-Pass (G4TP1 and G4TPX1 series) -
By-Pass (all models except G4TP1 and G4TPX1 series) -
Drip-out Mode -
Model Select Menu
Batch Size -
Batch Size (Brew Buttons Displayed)
TP1 and TPX1
Three Batches NA
Large
Two Batches
Small
One Batch Large
All other models
Large
Medium
Small
Large
Small
Large
PG1
H