Curtis IntelliFresh G4GEMXSIFT30x Instructions Manual page 10

INSTALLATION INSTRUCTIONS
Connection to an Electrical Outlet
18 If not already installed, install the appropriate type of
power plug for your locality. Consult local electrical
codes to determine the approved type of power plug
for your region.
19 Connect the power plug to the electrical outlet.
WARNING: Connect the power cord only to the
not compatible, either have the cord replaced or
have the electrical outlet upgraded by a licensed
electrician. Do not use an extension cord. Do not
Power Up the Brewer
Turn on the water supply valve.
21 Make sure that the circuit breaker supplying power to
the unit is on.
22 Turn the toggle switch on the back of the brewer to the
23 Go to the PROGRAMMING GUIDE section and
program the brewer for the correct model and batch
number.
24
volume, the heating elements will turn on automatically.
Depending on the incoming water temperature and
"Ready to Brew" should be on the display.
IMPORTANT:
higher elevations, reduce the factory set operating
See the PROGRAMMING GUIDE section.
25
ml of hot water through the hot water faucet to help
purge air from the tubing inside the brewer.
26
remaining air from the tubing. See OPERATING
INSTRUCTIONS. During the initial brew cycle and
water tank.
Style
II14
D