Network Setup; Dw Ip Finder - Digital Watchdog MEGApix DWC-MB45iALPRT User Manual

Network Setup -

DW IP Finder™

Go to http:/ /www.digital-watchdog.com
1
quick-search bar at the top of the page.
The latest IP Finder software will appear in the search results. Click on
2
the link to download the file to your computer.
The software will scan your network for all supported cameras and
3
display the results in the table. Allow up to 5 seconds for the IP Installer
to find the camera on the network.
You can press the 'Refresh List' to search the network again, or filter the
4
search results by entering a value in the filter box.
Check the box next to 'Display Camera Thumbnail' to view a JPEG image
5
of the camera's view next to the camera name on supported models.
The default network type of camera is DHCP mode.
If you have a DHCP server, it will automatically set the Camera IP.
Contact your network administrator for more information.
To save the changes made to the camera's settings, input the username
6
and password of the camera for authentication.
If the camera needs to be rebooted after the settings were changed,
7
press the 'Reboot' button. The camera will power cycle and will appear back in the search results once
the reboot is complete.
Default username and password: admin/admin.
For security purposes, it is highly recommended to change your password after the initial setup.
Click 'Save' to save changed values.
8
To update the camera's firmware from the DW IP Finder™, click on the firmware tab, upload the firmware
9
file and select the camera to update. You can update multiple cameras at the same time.
and search for 'IP Finder' on the
13