Routing And Redirection Service; Vpn Passthrough - BandLuxe K535 Series User Manual

Using Web-based Management
IPv4-Gateway:
Metric:
Note: If contents in the text box is invalid, a
side of the text box, and the text color changes to red. For example,
the following demonstrates an invalid target Host-IP or Network
address:

Routing and Redirection Service

This option enables or disables Network Address Translation (NAT)
service, which is a standard that allows multiple computers on a private
network to share a single IP address.

VPN Passthrough

A Virtual Private Network (VPN) is a type of secured private network
connection, built upon publicly-accessible infrastructure such as the
Internet. They usually provide connectivity to various devices behind a
gateway or firewall.
IPSec
Passthrough:
PPTP
Passthrough:
L2TP
Passthrough:
40
If needed, a custom IPv4-Gateway address can be
specified here.
Specifies the network path priority number (usually
associated with the network path‟s administrative
distance). The lower the metric number, the higher
priority of this static route in the network routing
protocol.
The default value is 0 (highest priority). A different
metric number can also be specified here.
IP Security (IPSec) provides authentication and
encryption. Since it is mainly a Layer 3 technology, it
can secure all data on the network. To allow IPSec
tunnels to pass through the Router, click „Enabled‟.
Point-to-Point Tunneling Protocol (PPTP) allows you
to establish a connection to an enterprise network. To
allow PPTP tunnels to pass through the Router, click
Enabled.
Layer 2 Tunneling Protocol (L2TP) is an extension of
the Point-to-Point Tunneling Protocol and is also used
to establish virtual private networks. To allow L2TP
will appear on the right