Table of Contents
Advertisement
3. Filter Source IP Address: Enter the source IP address to be
filtered. The text color will turn red with
invalid IP address entered (e.g.
address entered becomes valid, the text color changes back to
black without
4. Filter Source Port: Enter the source port number to be filtered.
5. Click
to the IP Filtering list.
In the status area, the message Unapplied Change may appear
next to "Operator Name" to indicate configuration changes stored in
the router.
6. More rules can be added to the IP filtering list by repeating Steps
1-5.
7. (a) To enable or disable an IP filtering list rule, click its check box
under „Enable‟.
(b) To remove any Port Triggering rule, click its corresponding
8. To edit a particular IP filtering rule in detail, click its corresponding
flexible and detailed than express settings in Steps 1-4) will appear.
After making any changes, click
to exit this configuration page.
Numerical and text values shown in the illustrative examples are for
Note:
61
on the right (e.g.
. The IP filtering rule you have just entered will be added
button.
button, and the rule‟s associated configuration page (more
Using Web-based Management
on the right for any
). When the IP
).
(a)
. Finally click
(b)
Advertisement
Table of Contents
