BandLuxe K535 Series User Manual page 11

6. One of the following two methods can be chosen to link your PC with
the router.
A. Wireless Connection (for Windows)
To link your PC to the router via WiFi, in Microsoft Windows, go to
Control Panel > Network Connections. Right click on Wireless
Network Connection and choose View Available Wireless
Networks. Select default SSID [BR_LTE_xxxx] and enter default
password (the last 4 digits of MAC address converted into 2-digit
decimal numbers, please see table below for conversion method).
The "xxxx" corresponds with the last 4 digits of MAC address. Click
Connect.
Wireless Connection (for Mac)
Click the
wireless networks. Select default SSID [BR_LTE_xxxx] and enter
default password (the last 4 digits of MAC address converted into
2-digit decimal numbers, please see table below for conversion
method). The "xxxx" corresponds with the last 4 digits of MAC
address. Click Join.
Conversion Table: Each of the last 4 digits of MAC address is
hexadecimal. Here is the corresponding table between a
hexadecimal digit and its corresponding 2-digit decimal number:
Hexadecimal
B. Wired Connection
To connect your PC to the router via an Ethernet cable, connect one
end of the cable to one of the four LAN ports on the router, and
another end of the cable to an Ethernet port on your computer.
9
on the upper side of the screen to view available
Decimal
Digit Number
0 00
1 01
2 02
3 03
4 04
5 05
6 06
7 07
Hexadecimal Decimal
Digit Number
8
9
A
B
C
D
E
F
Installation
08
09
10
11
12
13
14
15