Table of Contents
Advertisement
Using Web-based Management
IPv4-Gateway:
Metric:
Note:
If contents in the text box is invalid, a
the text box, and the text color changes to red. For example, the
following demonstrates an invalid target Host-IP or Network address:
Routing and Redirection Service
This option enables or disables Network Address Translation (NAT) service, which is a
standard that allows multiple computers on a private network to share a single IP
address.
VPN Passthrough
A Virtual Private Network (VPN) is a type of secured private network connection, built
upon publicly-accessible infrastructure such as the Internet. They usually provide
connectivity to various devices behind a gateway or firewall.
IPSec Passthrough:
PPTP Passthrough:
L2TP Passthrough:
34
If needed, a custom IPv4-Gateway address can be
specified here.
Specifies the network path priority number (usually
associated with the network path's administrative
distance). The lower the metric number, the higher
priority of this static route in the network routing
protocol.
The default value is 0 (highest priority). A different metric
number can also be specified here.
IP Security (IPSec) provides authentication and
encryption. Since it is mainly a Layer 3 technology, it can
secure all data on the network. To allow IPSec tunnels to
pass through the Router, click 'Enabled'.
Point-to-Point Tunneling Protocol (PPTP) allows you to
establish a connection to an enterprise network. To allow
PPTP tunnels to pass through the Router, click Enabled.
Layer 2 Tunneling Protocol (L2TP) is an extension of the
Point-to-Point Tunneling Protocol and is also used to
establish virtual private networks. To allow L2TP tunnels
will appear on the right side of
Advertisement
Table of Contents
