Table of Contents
Advertisement
Your K530 is designed to handle large voltage swings from 9V to 32V, in
case of undesirable voltage transients or brown-outs. However, for best
use and proper protection of your K530, it is necessary to regulate input
voltage before feeding it to the power input of your K530.
There are two ways of electrical voltage regulation. One way is to
implement a power management block that harnesses battery power
during engine startup. The more effective way is to implement a power
management block with filters that further smoothes out residual spikes.
Installation
General Guidelines
Follow these guidelines for optimal vehicle installation of your K530:
1. Place the router as close to the voltage regulators, such as power
management block and filters, as possible. In other words, keep the
power cables short between the router and the output connectors of
the voltage regulators.
69
Appendix A: Vehicle Installation Guide
Advertisement
Table of Contents
