Table of Contents
Advertisement
3. Black list* – Click
the drop-down list, or select "-- custom --" and enter a specific
client‟s MAC address.
* To add another MAC address to the list, click
drop-down list; then repeat the MAC address selection/specification.
To remove a MAC address from the list, click
Advanced Settings
This tab item is for advanced adjustment settings for WiFi connection.
Fragmentation
Threshold
RTS/CTS
Threshold
WMM Mode
WPS Settings
WiFi Protected Setup Settings
This tab item appears when „Encryption‟ in "Wireless Security" is set to
one of the following: WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK
Mixed Mode.
WPS: To enable the WPS button for quick WiFi connection setup, click
„Enabled‟, and 2 additional items will appear: Mode and Start.
49
and select an undesired MAC address from
Maximum transmittable data packet frame size
without frame fragmentation; the default value is 2346
Defines Request-To-Send (transmitter) and
Clear-To-Send (receiver) control packet size; the
default value is 2347
Enables or disables Wi-Fi Multimedia Mode, which
gives multimedia data contents (voice, video, and
audio) higher priority over wireless networks. The
default setting of WMM Mode is Disabled.
Using Web-based Management
to add a new
.
Advertisement
Table of Contents
