Table of Contents
Advertisement
3. Using Your Baby Monitor
Please read these instructions carefully, and be aware that this baby monitor is
only intended as an aid. It is not a substitute for responsible, correct parental
supervision.
3.1
Power on or off the Baby Unit
Slide the Power ON/OFF switch to turn the Baby Unit on. The
light turns on.
Slide the Power ON/OFF switch to turn the Baby Unit off. The
light turns off.
3.2
Power on or off the Parent Unit
0
Press and hold
0
Press and hold
off.
NOTE
If you place the parent and Baby Units too close together, you may hear a high
pitched noise. This is not a fault. The units are designed to be operated at some
distance apart, e.g. in separate rooms, so move the units further apart.
3.3
Turn off the Parent Unit screen
You can turn on or off the Parent Unit screen without powering off the Parent
Unit. You can still hear sound from the Baby Unit.
0
Press
on the Parent Unit to turn off the screen.
Press any key on the Parent Unit to turn on the screen again.
3.4
Adjust the speaker volume for Parent Unit
You can adjust the speaker volume from
Press
or
on the Parent Unit when it is in camera viewing mode.
When the speaker volume is set to off, the screen displays
Using Your Baby Monitor
to turn on the Parent Unit. The
again to turn off the Parent Unit. The
Power/Link indicator
Power/Link indicator
Volume 1
Volume 5
to
Power/Link indicator
Power/Link indicator
light turns on.
light turns
, or turn it off.
.
13
Advertisement
Table of Contents
