Table of Contents
Advertisement
Overview of Your Baby Unit
1. Power ON/OFF switch
Slide to turn the Baby Unit on or off.
2. Microphone
For transmitting sound to the Parent
Unit.
3. Infra-red LEDs
6 infra-red LEDs for night vision.
(Note: picture will not be in colour
for night vision.)
4. Light Sensor (Night Vision Mode)
For detecting when to switch on the
infra-red LEDs.
5. Camera Lens
For transmitting video to the Parent
Unit.
Important guidelines for installing your Baby Monitor
• To use your Video Monitor Baby and Parent Units together, you must be able to
establish a radio link between them, and the range may be affected by
environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or
reinforced concrete between the Baby and Parent Units may block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls or
electrical equipment, such as radios, TVs, computers, cordless or mobile phones,
fluorescent lights or dimmer switches.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi
®
Bluetooth
systems, or microwave ovens, may cause interference with this
product, so keep the Baby Monitor at least 1.5 metres (5 feet) from these types of
products, or turn them off if they appear to be causing interference.
• If the signal is weak, try moving the Parent and/or the Baby Unit to different
positions in the rooms.
2
3
1
4
6. Power/Link indicator
Lights up in green when the Baby Unit
is turned on and linked to the Parent
Unit. Flashes in green when the Baby
Unit is searching for the Parent Unit, or
in pairing mode. Off when the Baby
Unit is powered off.
7. PAIR Key
Press and hold to pair with a Parent
Unit.
8. Power Adapter Socket
9. Temperature Sensor
5
7
6
®
routers),
8
9
Advertisement
Table of Contents
