Assembly - LawnMaster CLMF2434G Instruction Manual

ASSEMBLY

Assembly Preparation
■ Carefully remove all contents from the product packaging.
■ Ensure you have all the accessories and tool(s) needed for assembly and operation. This also
includes suitable personal protective equipment.
WARNING
If any parts are damaged or missing do not operate this product until the parts are replaced.
Failure to pay attention to this warning could result in serious personal injury.
WARNING
Do not attempt to modify this product or create accessories not recommended for use with this
product. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING
Do not connect the battery and/or the isolator key before the product is completely assembled.
Failure to comply could result in accidental starting and possible serious personal injury.
WARNING
Never operate the mower without the proper safety devices in place and in working order. Never
operate the mower with damaged safety devices. Failure to pay attention to this warning can result
in serious personal injury. Make sure all packing is removed from product parts before starting
assembly.
Assembling the Lower Handle (See Fig. 1)
■ Unfold the lower handle. Place the lower handles into the slots in the deck.
■ Rotate the 2 wing knobs clockwise to lock each lower handle into position (Fig .1).
Assembling the Upper Handle (See Figs. 2-3)
■ Fit the upper handle and lower handle together with the wing knobs on both sides of the handle
assembly. Ensure the bolt and wing knob are assembled in the correct method. Failure to
assemble the wing knob correctly can result in damage to the product (Fig. 2).
■ There are two possible height positions. Choose the one most suitable to the operator's height.
■ Secure the cable against the handle frame with the supplied cable clips.
■ When the two wing knobs are loosened, the handle can be folded for easy storage. Ensure the
power cable is not caught between the folding sections (Fig. 3).
18