Remove any expansion boards installed in the primary riser cage.
7.
Remove the primary PCI riser cage.
8.
Non-hot-plug drive carrier
CAUTION:
all bays are populated with either a component or a blank.
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
If installed, remove the security bezel
3.
To prevent improper cooling and thermal damage, do not operate the server unless
("Remove the security bezel
(optional)" on page 26).
Removal and replacement procedures 30