Install Channels - Philips 22HFL4372D/10 User Manual

If you do not want this message to appear
1.
Press .
2.
Select [Setup] > [Channel settings]
or [Satellite settings] > [Channel
installation] > [Channel update message]
> [Off], then press OK.
• To disable automatic updates In the
[Channel installation] menu, select
[Automatic channel update] > [Off].
Select audio language
If the TV channel has multiple or dual sound
broadcast, you can select the preferred audio
language.
1.
While watching TV, press
• [Audio language] : Select the audio
language for digital channels.
• [Dual I-II] : Select the audio language
foranalogue channels.
Select video stream (for DVB-S
channel only)
If available, you can view different video
stream of the channel. (depending on
broadcast service provider).
1.
Press .
2.
Select [Video selection] to view the
various selections.
Install channels
Automatic install
When the TV was switched on for the
first time, a full installation of channels was
performed. You can redo this full installation
again to set your language, country and install
all available TV channels.
•
[Search for satellite] is only available if the TV
supports DVB-S.
1.
.
2.
3.
4.
•
Press
•
During installation, leave [Settings] unchanged
unless your digital provider provides you with the
specific values to enter.
•
When digital TV channels are found, the list of
installed channels may display empty channel
numbers. You can rename, reorder or uninstall
these channels.
Access DVB-C or DVB-T channels
If you have installed both DVB-C and DVB-T
channels, you have to switch to the respective
network to watch channels on that network.
1.
2.
3.
Note
Press .
Select [Setup] > [Search for channels] or
[Search for satellite], then press OK.
Follow the on-screen instructions to
complete the channel installation.
Once complete, select [Finish], then
press OK.
Tip
a
to see the channel list.
Note
While watching TV, press
Select [Setup] > [Channel settings].
Select [Channel installation] > [Antenna
or Cable DVB].
EN
23