Philips 22HFL4372D/10 User Manual page 37

[Factory default]
Restore the factory picture and sound setting. Channel
installation is not changed.
Channel Setup
The Channel Setup function depends on the
state of the PBS Mode:
Channel Configuration
[Channel setup]
Layer 1 Layer 2
Channel setup <Action>
Activate the channel setup menu item by
pressing [OK], or [>] and the installed channels
will be displayed in a Channel Grid.
Press the RC6 GUEST key on the Professional
Setup RC to put this into TV Setup mode.
Press the OPTIONS key on the Professional
Setup RC to option the options display.
The following options can be selected:
Rename
Reorder
Show hidden channels
Hide channel
Blank channels
MyChoice setup
ThemeTV setup
[Rename]
Rename the current selected channel
[Reorder]
Change the order of the current channel to be
presented in the Chanel Grid:
Navigate to the channel to be adjusted
Press [OK]
Move the current channel to the preferred
location using the arrow keys
Press [OK] to accept
[Insert] Channel will be inserted in the
Channel Grid order
[Swap] Both selected channels will swap their
location in the Channel Grid order.
Make next changes, or press [Options]
key to exit.
Layer 3
Press OK or >
Press OK
[Show hidden channels]
Presents the hidden channels in the Channel Grid as
blanks.
These blank channels can NOT be selected by
Channel number or P+/P-.
If activated new a second level for [Options] is
available:
Exit Cancel operation
Unhide All Make all channels visual again
Blank Channels The Blank channels function disables
the display of video on the TV, but
does not affect the audio output. This
function can be used for audio
applications (example: music-only
channels, and so on) which do not
necessarily require the display of
video.
Mark the channels to be blanked.
[Hide channel]
Hide the current channel on the Channel Grid. This
channel can NOT be selected by Channel number or
P+/P-.
[MyChoice setup]
The MyChoice setup feature enables the configuration
of the the MyChoice PayTV channel list and 'the
other'channels list.
In the event that the MyChoice function is activated
and a valid PIN code is received, the channels in R0
will become available to the guest.
In the event that the MyChoice function is activated
and no valid PIN code is received, the channels in R1
will become available to the guest.
Mark the channels that are to be included in list R0
and R1.
[ThemeTV setup]
The ThemeTV setup feature enables the configuration
of the UI and the configured channels.
For country specific themes, the Theme 1 up to Theme
12 can be configured.
For the specific 'other' themes, Theme 13 up to Them
15 can be configured.
Mark the channels that are to be included in the
themes.
Store Settings
To confirm the changes in the PBS Setup menu
the changes MUST be stored.
[Action] Press '>' or 'OK' to store the new settings
EN
35