Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Philips 22HFL4007D/10
Summary of Contents for Philips 22HFL4007D/10
- Page 1 Philips Hospitality TV Installation manual for 22HFL4007D/10 26HFL4007D/10 32HFL4007D/10 42HFL4007D/10 Version 1.1...
-
Page 2: Table Of Contents
Contents Requirements before starting the installation ......................2 Find out the state of the TV ............................3 Re-install TV ................................4 Installation wizard ..............................6 Channel options ..............................15 Reordering channels ............................15 Rename channels ..............................17 Hide channels ..............................17 Professional Setup .............................. -
Page 3: Requirements Before Starting The Installation
Guest Remote by pressing 1,2,3,6,5,4. Go to: http://www.support.philips.com/support Enter the model number and check to confirm you have the latest version available. Confirm the software version present on TV is identical with the one from website. If not please download the latest version from website, unzip and save on to a USB key The USB key must be format FAT32 and preferably empty to avoid and accidental upload of wrong setting and software. -
Page 4: Find Out The State Of The Tv
2. Find out the state of the TV It is important to know if a TV is in ‘virgin mode’ (out of the box) or installed before. If you can see this screen below, you know that the TV is in ‘virgin mode’ and you can install the set. See chapter 4 of this manual. -
Page 5: Re-Install Tv
3. Re-install TV If you want to start an installation from scratch you can always re-install the TV. This can be done by using the option: Re-install TV set. If PBS is active you can access the setup menu press the ‘RC5 SETUP’ key, and then press the ‘Home/Menu’ button (For the guest remote control, press the following keys in sequence: 3,1,9,7,5,3, ‘MUTE’) , then go to TV Setup, confirm with “OK”. - Page 6 Press “OK” to access the sub-menu, navigate to “Reinstall TV”. Press “OK” to reinstall the TV set. If all is correct select “YES” and press “OK”. After this operation the TV will power off and on and display the installation wizard. Note: All settings are at default values and no channel plan is available.
-
Page 7: Installation Wizard
4. Installation wizard When you turn on the TV for the first time, or you have reinstalled the TV, you should see the following screen. Here you will need to select your preferred language. After this, you will need to select the country. Depending on the country selection, some pre-defined settings will be activated, because of local broadcast requirements. - Page 8 The next step is to select ‘Wall mounted’ or ‘On a TV stand’. This option changes some settings for the audio and image of the TV. Now you can select the visual and hearing impaired options. If you select ‘On’, your TV will automatically turn on settings to help visual and hearing impaired people.
- Page 9 For the channel installations, select ‘Install TV channels’ and press ‘OK’ Then you can select ‘Continue’ and press ‘OK’ again. Here you can select the type of channels you would like to install and what preference you will use. It is advisable to check the settings before starting the search.
- Page 10 Note: If all options are disabled you have to go down to the Digital channels option and set the digital channels to ON. A screen is displayed to make changes to set the channel list/map configuration: [Symbol rate mode]: Automatic TV will use the preset Symbol rate (6.900/6.875) Manual Option to set Symbol rate 1 and Symbol rate 2 [Symbol rate 1]: 0.000 (to set) [Symbol rate 2]: 0.000 (to set)
- Page 11 Frequency step size has two options: 1. “1 MHz” – With Full scan, the step size to search for channels is 1 MHz. The scan will take more time but will find also channels broadcasted not according to the channel grid. 2.
- Page 12 During the channel search you can see the progress bar and how many channels are found at that time. When the search is done, you should see “Channel search complete” and a summary of the channels found. In this case: Digital channels found: 53 Analogue channels found: 0 Press the “OK”...
- Page 13 The wizard will ask you some questions about which image you prefer, select the option you desire and press “OK” on the remote control. Once this wizard is done, you will return to the installation menu again. The network wizard will guide you through network setup.
- Page 14 Please select “Next” and press OK to continue The connection will be made to wireless network or via wired network, depending on preferences. TV will automatically acquire an IP address if this is available via DHCP. After the connection is made, the result is shown on the TV. The last option in this menu is “Add your devices”.
- Page 15 When you are done with this, select “Done” and press ‘OK’ on the remote control. After pressing “Done” you have completed the installation of the TV and you should see this screen. Press “OK” on the remote control to exit this wizard. Note: This wizard will not be available anymore when you start the TV the next time.
-
Page 16: Channel Options
5. Channel options a. Reordering channels For reordering TV channels the channel plan from PBS Setup must be used. In consumer menu you cannot rearrange channels. The PBS Setup can be accessed by using the Yellow remote (RC 22AV8573 Master Remote control) and pressing the MENU Button or with the TV remote press 3,1,9,7,5,3, MUTE). - Page 17 Navigate to the channel that you want to move and press “OK” on the remote control to select that channel. The arrows around the channel indicate that the channel is selected and can be moved. Use the arrow keys to move the channel to the new position.
-
Page 18: Rename Channels
Press “OK” on the remote control to confirm that you are done with the re-ordering. b. Rename channels Select the channel, press the “Options” button on the remote control and select “Rename” to change name of a channel. If you then press the “OK” button a virtual QWERTY keyboard will pop up. c. -
Page 19: Professional Setup
[NetTV] [Configure Net TV] allows you to disable/enable the Net TV portal provided by the Philips Net TV server. If you select [Configuration], [Hotelier] and [Profile], options become visible -- [Hotelier] and [Profile] are text entry fields that allow you to configure the Net TV portal for the hotel. - Page 20 [Icon Label] Change the label of the [Browse Portal] icon. [Portal URL] Enter the URL to access from [Browse Portal]. The address is for the SmartUI external server. [Room ID] Entry field to store 4 digits to set the Room Identifier. Room ID can be used to distinguish between different floors/rooms/setups when using SmartInstall.
- Page 21 [Switch on feature] Starts up in Theme TV, Smart UI or Net TV modes. [Blank Until Feature] The TV will remain black until the Feature is fully loaded. Note: Enabling this option will increase the startup time. [Switch on Picture Format] Switches to a pre-defined picture format.
- Page 22 [Local keyboard lock] [Off]: The local keyboard (control buttons on TV) buttons are enabled. [On]: The local keyboard (control buttons on TV) buttons are disabled, power button still enabled. [All]: All local keyboard (control buttons on TV) buttons are disabled. [Remote control lock] [OFF]: All buttons on the guest remote control will function normally.
- Page 23 [Browse USB] Enables / disables the USB Browse icon to be presented in the Guest Menu. [Off]: When set to Off, the TV will hide the USB icon in the Home menu. [On]: When set to On, the TV will show the USB icon in the Home menu.
- Page 24 [SXP Baudrate] Sets the Baud rate for the Serial Express communication channel to be 38200 or 19200 Baud (bits per second). [Enable CI-slot] Enables or disables the use of the integrated CI/CI+ slot: [Off]: No pass through of the TV input signal via the CI-Slot Card is possible;...
- Page 25 [Enable subtitle] Enables or disables the use of subtitles in a DVB broadcast channel: [Off]: No subtitles services available [On]: Subtitles services available [Enable Channel Map] Select Channel Map to be viewed: [Native]: Show standard default channel map [BDS]: To be used only if a system is connected [Source setup] Lists all supported connectors on the TV.
- Page 26 [Scrambled Program OSD] Show OSD on scrambled TV channel. [Power settings] The possible power settings are explained below. The power on function allows the TV to enter a specific mode ([On], [Standby], or [Last status]) of operation when the mains power is activated (cold start): [On]: The TV will always turn on (show startup channel) after the mains power is connected.
- Page 27 [Delayed reboot] Enables or disables the use of delayed standby: [On]: TV is able to switch on immediately after switching to standby. [Off]: Switch ON time of the TV will be longer after switching to stand-by. [Standby Delay Timeout] This option will set the amount of time for Delayed reboot. 5 mts –...
- Page 28 [Time Download] Select the source for the clock time: [Automatic]: Clock time is retrieved from the “Download Program” channel. [Manual]: The clock time is set using the Time Setting option. Note: If the power is disconnected the TV will lose the time set. [Download Country] Set the selected country as the source for clock time.
- Page 29 [Reference Time and Date] [Feature settings] Check Feature settings (page 33) [Speaker settings] [TV Speaker Enable] [Off]: The main speakers are muted. The RC can control the volume and mute the headphone/bathroom speaker [On]: The main speakers are active and the behavior of the headphone/bathroom speaker is defined by the Independent Main Speaker Mute.
- Page 30 [Headphone] The default volume for headphones can be set. The value define will be applied when the headphones are connected. [Factory default] Restore the factory default of the PBS Menu. Channel installation is not affected. [TV Setup] A shortcut to enter the consumer installation menu. Consumer installation menu should be accessed to change e.g.
- Page 31 [Smart Clone] Check Smart Clone section (page 32) [RF Download] Check RF Download section (page 34) [Express Box] Only applicable for system connected installation. After storing PBS settings, the TV will restart to apply the new parameters. Now you can clone all settings to other TV sets by using the option TV to USB and USB to TV.
-
Page 32: Welcome Logo
Welcome Logo There are 2 Philips logos displayed at startup. The second logo can be replaced by a picture uploaded via USB. File format: 1280 x 720.jpg file. The Welcome Logo is displayed only when Standby mode is set to “Green”. -
Page 33: Smart Clone
8. Smart Clone Smart Clone With Smart Clone it is possible to copy to/from a USB device TV the configuration data and channel list data. Place a USB Memory stick in the USB side connector of the TV. *The USB device should be formatted as FAT or FAT32. [USB to TV] 1. -
Page 34: Feature Settings
[Startup]: Show ThemeTV on startup and able to show the ThemeTV by pressing the ThemeTV button on the RC. [VSecure] VSecure is the hospitality content scrambling method used by the Philips Hospitality TVs. If you are interested to use it please contact the local Philips Hospitality TV sales representative. -
Page 35: Rf Download
Instead of using a USB memory device to do cloning and firmware update, this upgrading is also possible using the RF infrastructure. This is supported by SmartInstall (Philips Hospitality RF Download mechanism) and allows a simultaneous upgrade of all installed televisions. -
Page 36: Csm Menu (Consumer Setup Menu)
CSM (Consumer Setup menu) The CSM contains data about the TV software, serial number and other details. The menu can be accessed using a standard remote control or using the master remote control. 1. Using the standard remote control: press the following key sequence “1,2,3,6,5,4” 2.