26HFL5830D/27, 32HFL5860D/27, 37HFL5560D/27, 42HFL5860D/27, 42HFL7580A/27, 52HFL5580D/27 Read your Quick Use Guide and/or Owner’s Manual first for quick tips that make using your Philips product If you have read your instructions you may access our online help at www.philips.com/hospitality while with your product...
Read Before Operating Equipment For the quickest and most trouble free installation, please consult the quick start guide that came packed in the television or download it from www.philips.com/ hospitality. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this TV near water.
Page 4
Know these safety symbols This “bolt of lightning” indicates material not insulated within your unit which may cause an electrical shock. For the safety of everyone in your property, please do not remove product covering. The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
You should not attempt to do the work yourself. Philips bears no responsibility for improper mounting or mounting that results in accident or injury. Make sure that the wall mount is being fixed securely enough so that it meets safety standards.
Before calling service Check this list of symptoms and suggested steps before you request service. Note: Familiarize yourself with the commercial features described in the TV installation setup. The effects of several of these features, if not thoroughly understood, might appear as faulty operation.
Page 7
Symptoms Power TV cannot be switched Sound No sound Volume level cannot be increased or decreased beyond a certain value Suggested steps The POWER . button of the remote control is used to set the TV to stand-by mode or to switch on the TV. REMOTE CONTROL Check if is selected in the...
Page 8
Symptoms Remote TV does not respond to Control Guest Remote Control Suggested steps Change the batteries. Aim the remote control directly at remote control sensor lens on TV and press any button on the remote control. REMOTE CONTROL Check if is selected in the LOCK SECURITY...
Basic TV connections Antenna connection Connect the antenna or RF cable signal to the 75 Ω RF ‘:’ connector socket located on the TV. Mains connection Ensure that the mains voltage and frequency are correct. Refer to the product labelling and documentation.
Overview of TV connectors and controls AV 1 S-VIDEO DATA 1 AUDIO IN B Warning: • Risk of electric shock. The rear jack panel must be removed by qualified personnel only. • Do not connect any telephone cables or equipment to Data 1. POWER To switch the TV on and off.
Page 11
To connect to peripheral equipment, including high-definition equipment. Ω [ To connect to a bathroom speaker. Service For diagnostic purposes. Should only be used by qualified Philips personnel. Note: The following connectors are available on certain sets only. Side USB See USB.
These remote controls can be used for setup and configuration. RC2888/01 Guest Mode Remote Control (optional) RC2573GR RC2573GR is an optional remote control. It is used for Philips Commercial Solutions features and SmartCard settings. It can be purchased separately. RECALL TEXT SMART...
Description of guest remote control Source Select To toggle between available video sources. Closed Caption To activate the Closed Caption function. Smart Sound To select the predefined sound settings. Sleep To activate the sleep timer. Press the button repeatedly to increase countdown time.
Overview of TV menus SETUP LANGUAGE COMMUNICATION CHANNEL INSTALL CHANNEL INPUT DIGITAL RINGS LABEL MUTE AUTO INSTALL TV START CABLE TUNING USE CHANNEL TABLE CURRENT RING DIGITAL SETUP CHANNEL SETUP AUDIO DIGITAL CC SETUP EMERGENCY ALERT CONFIGURATION SWITCH ON / OSD PICTURE / SOUND SECURITY CONTROL...
Accessing the setup menu The following remote control commands apply to Philips Commercial Solutions TV products. These can be used for setup and configuration purposes. Accessing TV Setup Menu using the Remote Control (RC2573GR) Slide the button to the Setup location.
Installation 10.1 Selecting the language You can select ENGLISH, ESPANOL or FRANCAIS as your preferred language. • Press Æ repeatedly to select your preferred language. SETUP LANGUAGE ENGLISH COMMUNICATION CHANNEL INSTALL AUTO INSTALL TV CABLE TUNING USE CHANNEL TABLE CURRENT RING RING1 DIGITAL SETUP CONFIGURATION...
• To use the specified color code to correspond to the remote control select MULTI RC (see Appendix A on page 38 ). • Select SMART RC to access the SMOOVIE functionality on this TV set. • Select STORE and store all your selections.
Page 18
Select an input source • TUNER, AV, SVIDEO, CVI, VGA, HDMI1, HDMI2, CARD-CVBS, CARD-YC, CARD CVI, SIDE AV or SIDE SVIDEO Note: CARD-YC, CARD CVI, CARD-CVBS, SIDE AV and SIDE SVIDEO are available on certain models only. CHANNEL INSTALL CHANNEL INSTALL CHANNEL TV 2 INPUT...
Page 19
Searching the Digital Minor Channel / MPEG Program Number • DIGITAL MINOR CH / MPEG PROGRAM NUMBER, use 0 - 9 to key in the channel number (0 to 999). Í from Channel 0 to select • Press • NO is selected, go back to DIGITAL MAJOR CH.
10.4 Tuning channels automatically Note: This option is only available when TUNER is selected at the INPUT item of the CHANNEL INSTALL menu. Æ to enter START mode. Press SETUP LANGUAGE ENGLISH COMMUNICATION CHANNEL INSTALL AUTO INSTALL TV CABLE TUNING USE CHANNEL TABLE CURRENT RING RING1...
10.6 Selecting a virtual or physical channel Note: This option is only available when TUNER is selected at the INPUT item of the CHANNEL INSTALL menu. The USE CHANNEL TABLE option relates to the use of Virtual channels versus Physical channels. •...
Page 22
DIGITAL SETUP CHANNEL INSTALL CHANNEL SETUP AUDIO DIGITAL CC SETUP EMERGENCY ALERT Setting up the VCHIP / DIGITAL RATING and FACTORY CH RESET • Press Æ to enter the CHANNEL SETUP mode. CHANNEL SETUP CHANNEL INSTALL VCHIP / DIGITAL RATING FACTORY CH RESET •...
Page 23
Selecting the Digital Closed Caption options DIGITAL CLOSED CAPTION SETUP allows you to select the default Closed Captioning option and also configure the digital text / background properties of digital DIGITAL SETUP CHANNEL INSTALL CHANNEL SETUP AUDIO DIGITAL CC SETUP EMERGENCY ALERT DIGITAL CC CAPTION OPTION...
10.9 Selecting and confi guring settings and options The CONFIGURATION menu allows you to select and configure the settings and options for: • SWITCH ON / OSD • PICTURE / SOUND • SECURITY • CONTROL • VIDEO ADJUSTMENTS (only available on certain models) •...
Page 25
ZOOM 16:9, SUBTITLE ZOOM, WIDESCREEN, SUPERWIDE or FULLSCREEN). • POWER ON : Select the status either LAST STATUS, ON, STANDBY or FORCED ON on the TV when switched on. If LAST STATUS is selected, the last power status will be activated when the TV is switched on.
Page 26
STANDARD is selected in the SECURITY menu, the TV SETUP menu can be accessed by entering a special security code with a guest remote control. Contact the Philips Commercial Solutions Customer Care Center at +1 866 497-4225 should you require further assistance.
Page 27
• Press ï to select DECRYPTION CONTROL SECURITY CHANNEL INSTALL SECURITY STANDARD KEYBOARD LOCK REMOTE CONTROL LOCK DECRYPTION CONTROL VTRACK • Press Æ to enter the DECRYPTION CONTROL menu. Note: The fi rst four items in the DECRYPTION CONTROL menu are for your information only.
Page 28
Using V-Track to watermark NOTE: The VTRACK menu will not be displayed unless COMMUNICATION is set to OFF. VTRACK allows you to activate the watermarking functionality of the TV. • Press Æ to enter the VTRACK menu. CHANNEL INSTALL SECURITY SECURITY STANDARD KEYBOARD LOCK...
Page 29
CONTROL CHANNEL INSTALL DIGIT TIMEOUT 3 . 0 3 DIGIT ENTRY SOURCE MENU ITEM PIC FMT MENU ITEM CHANNEL GUIDE MIN VOLUME MAX VOLUME • ESP (Energy Saving Programmability) option allows you to select a specified period of time (from 1 HR / 2 HR ...
Page 30
• PIC FMT MENU ITEM allows you to remove Picture Format from the options menu the guest can see. The guest will not have access to change the picture formats. • YES is selected, Picture Format will appear in the options menu. If you select NO, Picture Format will not appear.
Page 31
Select and configure the settings and options for: • SMARTPOWER • SMART SOUND KEY • DEFAULT HDMI 1 AUDIO • DEFAULT HDMI 2 AUDIO • LOW POWER STANDBY • LOUD SPEAKER MUTE • USB BREAK-IN • SW DOWNLOAD CHANNEL INSTALL CONFIGURATION SWITCH ON / OSD PICTURE / SOUND...
Page 32
DVI Video can convert easily to HDMI with a simple adaptor, but the audio signal is not present and must then be connected to one of the other inputs on the TV. This feature allows you to match the DVI video to the Audio signal you have connected.
Page 33
SW DOWNLOAD SOURCE DIRECTION DOWNLOAD SW TYPE START • USB Source • Select USB to upload or download from a USB device. • In the DIRECTION option, select DOWNLOAD to download the software from the USB device. Select UPLOAD to upload the cloning information to the USB device.
Page 34
• SSB FIRMWARE is selected, the digital module software, including MPEG 2 and MPEG 4, is updated from the USB device. SW DOWNLOAD SOURCE DIRECTION DOWNLOAD SW TYPE SSB FIRMWARE START • STANDBY FIRMWARE is selected, the startup data is updated from the USB device.
Page 35
SW DOWNLOAD SOURCE DOWNLOAD DIRECTION CABLE TUNING RF CHANNEL NUMBER SW TYPE START • In the CABLE TUNING option,. If YES is selected, Channels 1 to 135 are available for selection at the RF CHANNEL NUMBER option. If NO is selected, only Channels 2 to 69 are available for selection.
Page 36
OFF and ON MUTE. CC / V - CHIP CHANNEL INSTALL SAVE CC DIGITAL CC MODE ANALOG CC MODE SAVED V - CHIP V - CHIP MENU ITEM V - CHIP SETUP Note: CC MODE only appears when CC is ON •...
10.10 Change Ambilight settings Note: This feature is only available for certain models. This section describes how to adjust your Ambilight settings. Confi gure Ambilight The AMBILIGHT menu allows you to select and configure the settings and options for: • AMBILIGHT •...
Page 38
CUSTOM. AMBILIGHT AMBILIGHT BRIGHTNESS MODE COLOR COLOR COOL WHITE SEPARATION COLOR BOOST BALANCE • CUSTOM is selected, a new menu item, CUSTOM COLOR, appears. Press Æ to enter the sub menu. AMBILIGHT AMBILIGHT BRIGHTNESS MODE COLOR COLOR CUSTOM CUSTOM COLOR SEPARATION COLOR BOOST BALANCE...
Appendix A Support for multiple remote controls Programming the Multi Remote Controls function Multi RC function supports up to four TV sets operating in one room without any interference from each other remote controls. Each Guest Remote Control must be programmed individually to one of the four color (Blue, Yellow, Green and Red) buttons on the remote control.
Standardized 15-pin connector, typically used for VGA / computer display signals. Data Communications Module. PCS terminology for devices that communicate with Philips Commercial Solutions products by means of the Philips SmartPort protocol. Directions For Use. Philips Consumer Electronics term for product instruction documentation.
Page 41
Real-time Transport Protocol. Defines a standardized packet format for delivering audio and video over the Internet. Setup Mode See System 7. Remote control mode used to configure Philips Institutional Televisions for specialized and/or restricted features such as front panel lockout, volume range, channel list, etc..
Page 42
DCM. System 0 First data word of a Philips RC-5 / RC-6 remote control code for standard television commands. Synonymous with Philips Commercial Solutions ”guest” mode. System 7 First data word of a Philips RC-5 / RC-6 remote control code reserved for specialized commands.
Product. Please retain and store your Proof of Purchase securely. WHAT IS COVERED? Defects in materials and workmanship if a valid claim is received by Philips within the Warranty Period. When the warranty on the purchased product expires, the warranty on all exchanged products (including their parts and service labor) also expires.
Page 44
Ground Transportation. In the event of a failure of multiple units at the same location, Philips reserves the right at its sole discretion to send personnel to the location to determine the cause of the failure and determine the most efficient means of resolving the failure.
Page 45
• The full address to which the swap model should be delivered. Then, contact Philips Commercial Solutions Customer Care Center at: (866) 497-4225 (IN U.S.A., PUERTO RICO AND U.S. VIRGIN ISLANDS, ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY.
Page 46
Just a phone call away Philips’ customer help desks are located worldwide. Within the U.S. you can contact Philips Customer Care Monday-Friday from 8:00 AM-9:00 PM Eastern Time (ET) and on Saturdays from 10:00 AM-5:00 PM ET by using the USA contact phone number listed above.
Long time contact with the screen causes deformations and color fading. 15. Environmental care • This Philips Institutional Television product and its packaging contain materials that can be recycled and re-used. Specialized companies can recycle your product to increase the...
Dolby Digital Manufactured under license from Dolby Laboratories. ‘Dolby’ and the double-D symbol are trademarks of Dolby Laboratories. Kensington Security Slot (if present) Your TV is equipped with a Kensington Security Slot, to prevent it from getting stolen. An anti-theft Kensington lock has to be purchased separately.