Maintenance; Troubleshooting - Pentair FLECK 5800 XTRI User Manual

User Guide Fleck 5800-XTRi-XTR-SXT-LXT
5.4. LXT controller
5.4.1. Recommendations
• Use only regenerate salts designed for water softening EN973;
• for optimal system operation, the use of clean salt free from impurities is recommended (for example salt pellets);
• do not use ice melt, block, or rock salts;
• the sanitizing process (both with liquid and electrochlorination) introduces chlorine elements which may reduce the lifetime
of the ion exchange resins. Refer to the technical guides for resins in common use, providing necessary checks on the
system.
5.4.2. Manual immediate regeneration
A
Press and hold
6 . Error codes
6.1. XTRi & XTR controller
Displayed when an alarm has occurred; accompanied with an audible alarm. Press
Displayed when an error has occurred. Press
6.2. SXT controller
The following error codes may be displayed during operation:
---0 Cam sense error:
---1 Cycle sense error:
---2 Regen failure:
---3 Memory error:
---4 Fail safe error:
6.3. LXT controller
The following error codes may be displayed during operation:
---0 Cam sense error:
---1 Cycle sense error:
--- 2 Regen failure:
---4 Fail safe error:
7 .

Maintenance

Mandatory:
functioning of the complete system, and be documented in the Maintenance record book.
Mandatory:
may void the warranty.
8 .

Troubleshooting

Please follow this procedure for any technical support:
A
Collect the required information for a technical assistance request.
→
Product identification (see 2.1. Serial label location, page 5 and Original settings, page 2).
B
Contact your local dealer who installed this device (see contact details on last page).
→
Also call him if the water tastes salty, if the water is not softened or if there is no salt consumption.
12 / 76
for 5 seconds.
Unplug the unit and plug it back. If error continue, call technical support.
Unplug the unit and plug it back. If error continue, call technical support.
Perform a manual regeneration. If error continue, call technical support.
Call technical support.
Unplug the unit and plug it back. If error continue, call technical support.
Unplug the unit and plug it back. If error continue, call technical support.
Unplug the unit and plug it back. If error continue, call technical support.
Perform a manual regeneration. If error continue, call technical support.
Unplug the unit and plug it back. If error continue, call technical support.
Cleaning and maintenance shall take place at regular intervals in order to guarantee the proper
The maintenance and service operation must be done by qualified personnel only. Failure in respecting this
to display the error screen for more detailed error information.
to silence the audible alarm.
Ref. MKT-UG-054 / A - 03.06.2022