Intelia Focus And Class Customer And Programming Menu - Philips Saeco INTELIA Service Manual

INTELIA-INTUITA
3.3.

Intelia Focus and Class customer and programming menu

espresso dispensing
button
Long espresso
dispensing button
Hot water/steam
selection button
Machine ready signals (GREEN)
Machine at correct temperature
- for coffee bean dispensing
- for hot water dispensing
Machine at correct temperature
- for pre-ground coffee dispensing
Hot water /steam selection
Water dispense pipe (spout)
Steam/water dispensing
Notice signals (ORANGE)
Machine in pre-heating phase
for coffee, hot water and steam
dispensing
The appliance is rinsing - wait
until end of operation
The machine signals that the
"INTENZA+"
replaced
If this screen appears after you switch the machine on, it means that you must
execute a descaling cycle.
Press "
Press "
filter must
" to access the descaling menu and consult the relative paragraph.
" to continue using the machine.
MEMO
be
03 BRIEF INSTRUCTIONS
ON/OFF button
Aroma / Pre-ground button
Machine in phase for dispensing
1 cup of espresso
Machine in phase for dispensing
1 cup of espresso
Machine in phase for dispensing
2 cups of espresso
Machine in phase for dispensing
2 cups of espresso
The machine is being programmed
with the coffee cup fill level
Brewing unit resetting
appliance reset
Fill the coffee bean container and
start the dispensing cycle
Proceed to load the circuit
Descaling button
(Focus)
during
6/10