Philips Saeco INTELIA Service Manual page 10

INTELIA-INTUITA
2.1. Technical specifications
Power supply and output:
Temperature monitoring:
Safety system:
Coffee heat exchanger output:
Stainless steel
Steam heat exchanger output:
Stainless steel
Gear motor:
Pump:
Overpressure valve:
Water filter:
Coffee grinder:
Automatic dosage:
Power consumption:
Dimensions: W x H x D in mm:
Weight:
Water tank capacity:
Coffee bean hopper capacity:
Dreg drawer capacity:
Heat exchanger capacity:
Water circuit filling time:
Heating time:
Grinding time:
240 V~ 50 Hz 1850 W - 230 V~ 50/60 Hz 1850 W
120 V~ 60 Hz 1500 W - 100 V~ 50/60 Hz 1300 W
(NTC) variable resistor sensor - transmits the value to the
electronic card
2 thermostats at 190°C one shot
(230 V~) 1900 W
for coffee, hot water and steam dispensing
As above
2 rotation directions; power supply 24VC
Ulka Type EP5/S GW approx. 13-15 bar with reciprocating
piston and thermal switch 100°C 48 W, 230V, 50 Hz, 120V,
60Hz 100V, 50/60 Hz
Opening at approx. 16-18 bar
In tank
Direct current motor with flat ceramic grinder blades
Dose adjustment controlled by the electronic system
During heating phase- approx. 5.6 A
256x340x440 (data may vary depending on the model)
9 kg
1.5 l
300 g. of coffee beans
10
10 (11 if after 9 dregs you dispense a double espresso)
Approx. 15 sec Max. on first filling cycle
Approx. 45 sec.
Approx. 8-10 sec.
02 TECHNICAL SPECIFICATIONS
1/6