Customer Menu In The Gran Baristo Basev2 And - Philips Saeco GranBaristo Service Manual

GRAN BARISTO
3.1.1. Customer menu in the Gran Baristo BaseV2 and AvantiV2
"Espresso Macchiato"
Display messages
BEANS CONTAINER EMPTY
Fill the coffee bean hopper.
ADD COFFEE BEANS
INSERT BREW GROUP
The brew group must be inserted
into the machine.
INSERT COFFEE
Insert the coffee grounds drawer
GROUNDS DRAWER
and the internal drip tray.
Empty the coffee grounds drawer.
Note: The coffee grounds drawer
must be emptied only when the
EMPTY COFFEE
machine requires it and with
GROUNDS DRAWER
the machine on. If the drawer is
emptied with themachine turned
off, the machine will not record the
emptying operation.
CLOSE
FRONT DOOR
Close the service door.
Remove the water tank and fill it.
WATER TANK EMPTY
ADD WATER
You can fill the water tank also
through the dedicated hole on the
lid.
EMPTY INTERNAL
Open the service door and empty
DRIP TRAY
the internal drip tray.
An event has occurred which requires the machine to be restarted. Take note of
the code (E xx) shown at the bottom. Turn off the machine, wait for 30 seconds
RESTART TO SOLVE
and turn it on again. If the problem persists, contact the Saeco hotline in your
country and quote the code shown in the display.
"Cappuccino"
button
button
"Latte Macchiato"
button
"Hot Milk"
button
"OK"
button
"ESC"
"UP" and "DOWN "
button
LCD Display
"Aroma"
"MENU"
Pre-ground
button
coffee button
"Special Beverages"
button
CLOSE BEAN
CONTAINER LID
HOT WATER
INSERT
WATER SPOUT
PLACE MILK CARAFE
AND OPEN SPOUT
DESCALE
PROFILE SAECO
0%
water circuit
priming
03 BRIEF INSTRUCTIONS
button
"Espresso"
button
"Long Espresso "
button
"Coffee"
button
"Caffè Crema"
CAFFE COFFEE
CREMA
button
"Stand-by"
button
Insert the coffee bean hopper
lid and/or beans lid.
Insert the water dispensing
spout to start dispensing. Press
"ESC" to exit.
Insert the milk carafe with the
dispenser open before starting
the dispensing.
Machine descaling is needed.
Refer to the maintenance menu
to select and start the cycle.
The machine signals the need
to replace the water filter
"AquaClean".
The machine is performing the
loading of the hydraulic circuit.
Wait for it to do so.
1/6