Philips Saeco INTELIA Service Manual page 53

INTELIA-INTUITA 05 SERVICE MODE
5.1.4. Intuita
To enter Test Mode
The machine enters in test mode by pushing the ESPRESSO and COFFEE buttons and then turn-
ing ON the AC power.
As long as the buttons are pressed the machine shows LED Double Service flashing.
When the buttons are released the machine passes to the first level of the test.
There are 6 different level, in each level the coffee-machine can execute different commands
Level 0: The machine tests the LED:
a)Turn ON every LED
b)Turn OFF every LED
c)Sequence turn ON every LED
Level 1: The machine tests the buttons:
a)Button Hot Water
b)Button Espresso
c)Button Coffee
d)Button Steam
e)Button Calc Clean
Level 2: The machine tests the other input signals:
a)Capacitive sensor in water tank
b)Switch door close / open
c)Switch brewing unit presence
d)Switch dump box presence
Level 3: The machine tests the aroma trimmer:
a)Aroma position 1 bean
b)Aroma position 2 beans
c)Aroma position 3 beans
Level 4: The machine tests the water circuit:
a)EV
b)Pump (plus flux meter)
c)Brewing unit moves to work
d)Brewing unit moves to home
Level 5: The machine tests the coffee powder circuit:
a)Heater (plus NTC sensor)
b)Grinder (plus rotation pick up)
16/22