sparkfun WIG-13660 Manual page 28

Note: This example assumes you are using the latest version of the Arduino IDE on your desktop. If this is
your first time using Arduino, please review our tutorial on installing the Arduino IDE. If you have not
previously installed an Arduino library, please check out our installation guide.
Arduino Libraries
The Qwiic Tsunami is a unique product, in that two different Arduino libraries are available to control the board. For
more information on how to install an Arduino library in the Arduino IDE, check out our tutorial below.
Installing an Arduino Library
JANUARY 11, 2013
How do I install a custom Arduino library? It's easy! This tutorial will go over how
to install an Arduino library using the Arduino Library Manager. For libraries not
linked with the Arduino IDE, we will also go over manually installing an Arduino
library.
Serial Control
As with the original Tsunami, the Qwiic Tsunami can also be controlled from the serial connection with the Tsunami
Arduino serial library. For more details on how to utilize this library, please refer to the Tsunami user guide and
tutorial, which are available on the Robertsonics website.
2
I C (Qwiic) Control
Unlike the original Tsunami, the Qwiic Tsunami now has a Qwiic connector; and therefore, the board can be
2
controlled with I C, through the Qwiic connect system, using the SparkFun Tsunami Qwiic Arduino library.
DOWNLOAD THE TSUNAMI ARDUINO SERIAL LIBRARY