Initialization File - sparkfun WIG-13660 Manual

In the example above, the firmware on the Qwiic Tsunami will correspond the filenames of the 16 files numbered
001 to 016 to each of the trigger inputs by default. The triggered
channel ( ).
1L

Initialization File

Note: When creating an intialization
the proper settings for the firmware on the Qwiic Tsunami. By default, the Qwiic Tsunami factory programmed
firmware is configured for the mono setting and the configuration tool settings should match the image below:
Below is a comparison of the configuration tool appearance between the mono and stereo settings. Users will
notice that some of the audio channel output options are greyed-out in the stereo setting.
Example of a filename trigger mapping. (Click to enlarge)
*.ini
The stereo setting option for the configuration tool. (Click to enlarge)
*.wav
file with the configuration tool, users should make sure to select
. (Click to enlarge)
files would be output on the first audio