Status Led - sparkfun WIG-13660 Manual

Buttons
There are two buttons available on the Qwiic Tsunami.
: Used to reset (reinitialize) the board after an SD card has been inserted.
RESET
: Used to update the firmware from the SD card.
USER
1. Hold the
2. Insert SD card with new firmware
files)
3. Press
RESET
4. Wait for successful firmware update status indicator before releasing the

Status LED

New on the Qwiic Tsunami is the RGB status indication LED.
The µSD card slot on the Qwiic Tsunami. (Click to enlarge)
button down
USER
button
The and
RESET USER
file (can have normal operation
tsunamix.hex
buttons on the Qwiic Tsunami. (Click to enlarge)
and
*.wav *.ini
button
USER