Page 1
Mount side support bracket with the hardware supplied (included with the installation kit) Left& right support brackets installed Mount unit support to the side brackets using the supplied hexagonal bolds (included with the installation kit) Installation manual CA-HM-UNI-EVO.009 | Version 1.0...
Page 2
Mount screen support to the screen using Mount screen cover onto the screen support the two center screws on each side using the remaining four screws as indicated (included with SPH-EVO62DAB & SPH-EVO64DAB) (included with SPH-EVO62DAB & SPH-EVO64DAB) Installation manual CA-HM-UNI-EVO.009 | Version 1.0...
Page 3
For SPH-EVO64DAB you need to use the center opening installed to the top. For SPH-EVO62DAB you can use to preference Completely inserted screen neck Slide the screen support into the unit support Installation manual CA-HM-UNI-EVO.009 | Version 1.0...
Page 4
Pull the screen neck towards the screen holder Slide the connector cover in the back of the screen until it ‘clicks’ into place and fix the screw (included with SPH-EVO62DAB & SPH-EVO64DAB) Final product image Installation manual CA-HM-UNI-EVO.009 | Version 1.0...