Advertisement
Quick Links
CA-HM-UNI-EVO.007
INSTALLATION KIT FOR SPH-EVO93DAB
Metal cage
Screen connector cover
Screen neck
Screen cover
Open locking mechanism
Left& right support brackets installed
1
3
Installation manual CA-HM-UNI-EVO.007 | Version 1.0
EN - Installation Manual
Unit support
Small hardware
Screen support
Unit cover
Mount side support bracket with the hardware
supplied (included with the installation kit)
Mount unit support to the side brackets
using the supplied hexagonal bolds
(included with the installation kit)
2
4
Advertisement
Related Manuals for Pioneer CA-HM-UNI-EVO.007
Summary of Contents for Pioneer CA-HM-UNI-EVO.007
- Page 1 Mount side support bracket with the hardware supplied (included with the installation kit) Left& right support brackets installed Mount unit support to the side brackets using the supplied hexagonal bolds (included with the installation kit) Installation manual CA-HM-UNI-EVO.007 | Version 1.0...
- Page 2 Mount screen support to the screen using Mount screen cover onto the screen support the two center screws on each side using the remaining four screws as indicated (included with SPH-EVO82DAB) (included with SPH-EVO82DAB) Installation manual CA-HM-UNI-EVO.007 | Version 1.0...
- Page 3 Slide the screen neck into the unit cover, through using some tape and extension cable CD-RGB150E pay attention to the positioning of the tabs (not included) Completely inserted screen neck Slide the screen support into the unit support Installation manual CA-HM-UNI-EVO.007 | Version 1.0...
- Page 4 (included with the installation kit) Pull the screen neck towards the screen holder Slide the connector cover in the back of the screen until it ‘clicks’ into place and fix the screw (included with SPH-EVO82DAB) Final product image Installation manual CA-HM-UNI-EVO.007 | Version 1.0...