CDA DC930 Series Manual For Installation, Use And Maintenance page 28

28
Connection the Double Oven Mains Cable
Important!
This oven must be connected to the mains power supply only by a suitably qualified person.
Unscrew the screw A securing the cover plate B behind the oven (fig. 34).
– Remove the cover plate B.
– Remove the screws C from the cable clamp (fig. 35).
– Insert the mains cable (type H05RR-F or H05VV-F - 3x2,5 mm
– Connect the phase and earth cables to the mains terminal connection block D.
N
L
– Refit the cable clamp so that it clamps the outer sleeving of the cable, and screw the screws C.
– Refit the cover plate B and fix it with the screw A.
WARNING: This appliance must be earthed
EARTH
NEUTRAL
LIVE
B
A
2
section) into the cable protector P.
C
Fig. 34
N
L
Brown (Live)
D
Blue (Neutral)
P
Green & Yellow
(Earth)
Fig. 35