CDA DC930 Series Manual For Installation, Use And Maintenance page 24

24
Important
– You need the following housing area to fit your oven correctly.
– The double oven is designed to fit into a cabinet of 600 mm width.
– The double oven can be built in the kitchen units, but you must ensure that it is properly ventilated.
– In the diagram the appliance is ventilated by means of the space in the top of the kitchen cabinet.
– Lift the appliance into position onto the shelf, taking care NOT to lift it by the door handles.
– Remember the housing should not be free standing but be secured to the wall and/or adjacent fittings.
WARNING
– We would point out that the adhesive which bonds the plastic laminate to the furniture must withstand
temperatures not less than 150° C to avoid delamination.
– The appliance must be housed in heat resistant units.
– The walls of the units must be capable of resisting temperatures of 75 °C above room
temperature.
Fig. 31