Table of Contents
Advertisement
60 PRODIGIT
Appendix 2 4016 series LAN Instruction
1.
Connect the 4016 to the power supply, connect to the lan cable, and connect the other end
of the network route to the HUB hub.
2.
Please execute IPScanner.EXE in the LAN directory on the CD. Windows security alert will
appear first. Please select the public network and press [Access].
The following screen appears: If no device appears, press F5 to re-detect, or check if the first
step is completed normally.
3.
The currently detected device will be displayed on the screen. Please press the IP Address
under Config. The following screen will appear:
4.
Please set an available network IP Address and Subnet Mask. (You can ask the network
administrator to get the correct available network settings)
Advertisement
Table of Contents
