Allied Telesis CentreCOM FS980M Series Quick Installation Manual page 11

Item
Power code
retaining clip
AC power
cords
Console
cable
Choosing a Site for the Switch
Review these site recommendations and requirements.
Before installing the switch in an equipment rack, check that the

rack is safely secured so that it will not tip over. Devices in a rack
should be installed starting at the bottom of the rack, with the
heavier devices near the bottom.
Before installing the switch on a table, verify that the table is level

and stable.
Before installing the switch on a wall, verify that the wall's material

is strong enough to hold the switch's weight. You should position
the device so that it can be screwed into the wall's framing timber
or equivalent structural element.
The power outlet should be located near the switch and be easily

accessible.
CentreCOM FS980M Series Quick Installation Guide
9 18PS
9PS 28
18 52
FS980M/
28PS
52PS
28DP
11