BFI Automation CFC 3000L Original Operating Instructions page 37

Transport, Installation and Connection
4.8.3 Laying the special cable KW6 for standard
housing
Plastic insert
outer PUR
union nut
jacket
No contact chamber may remain bare !
All contact chambers in the contact insert have to be fit-
ted with crimp contacts !
For this purpose use a suitable crimp tool (BFI part No.
8980-4801-00) !
On the flame scanner side the external shielding is con-
nected to the housing mass by means of a clamp con-
nection located between the plastic insert the threaded
part in the cable gland. On the other side the outer
shielding is cut off. The internal shielding is cut on both
sides.
inner PUR
jacket
15
20
55
thread
outer shielding
Contact-
Crimp contact
insert
single core
4-13