Safety Instructions - BFI Automation CFC 4000L Original Operating Instructions

2.3

Safety instructions

The following instructions on accident prevention have to
be observed when operating the compact flame controller.
Only operate the device if it is in a proper state !
• Do not remove or disable safety devices.
• Check for externally noticeable damage and defects
prior to using the device ! Immediately notify the ap-
propriate authority/person of any changes that occur
(including changes in operating performance). If nec-
essary, stop and secure the device immediately.
• Allow only authorised specialist staff to carry out set-up
and/or maintenance work.
• Replace worn or defective parts.
• Use suitable maintenance tools only.
• After repair work, refit all safety devices and carry out
electrical and mechanical checks.
• Check the operating instructions for details of displays
as well as switch-on and switch-off procedures.
• Prior to switching on the device, make sure that no-one
can be endangered by the device !
• The operating company is responsible for ensuring that
the device is only operated in a proper state and that
account is taken of all the appropriate safety require-
ments and provisions.
• The operating instructions always have to be kept
close to the device and be readily at hand.
• Any non-compliance with the safety instructions out-
lined in these operating instructions may lead to dam-
age to property, personal injury or even death.
Safety
2-3