Table of Contents
Advertisement
66/188
Installation
Please note:
Before attaching and
connecting, check that
all system sections have
the alignment and height
according to the reference
system section.
A:
System section with
section module
B:
System section curve
module
C:
Holding-down clamp
D:
Upper lock nut
E:
Lower lock nut
F:
Leveling foot
1.
Check the alignment
of the system
section with section
module (see fi g. 39
on page 63).
2.
Check the alignment of
the system section with
curve module (see fi g. 41
on page 65).
3.
If necessary, adjust the
height to the reference
system section:
Loosen the top locknut
(D) and extend or retract
the leveling foot (F)
accordingly. Tighten the
upper lock nut.
Bosch Rexroth AG, MIT: ActiveMover, 3 842 564 874/2021-04
7.5.7
Attaching and connecting system sections
2
= 0,02 mm/m
B
3
(4x)
Fig. 42:
Checking the alignment of the system sections
A
1
= 0,02 mm/m
D
C
E
F
3
(4x)
SW36
SW24
557 186-41
Advertisement
Table of Contents
