Replacing The Printed Circuit Board (Coil Driver) (Section Module) - Bosch rexroth ActiveMover Assembly Instructions Manual

144/188 Maintenance and repair
Necessary spare parts
• Printed circuit board
(coil driver)
3 842 555 967
1. Open the protective fl ap
of the section module
electronics box.
2. Unplug the 2 ribbon
cables from the printed
circuit board.
3. Unplug the 5 coil
connectors.
Bosch Rexroth AG, MIT: ActiveMover, 3 842 564 874/2021-04

10.4.16 Replacing the printed circuit board (coil driver) (section module)

1
5 x
Fig. 102: Replacing the printed circuit board (coil driver) (section module)
3
1
2
557 186-91