1. Overview; 2. Check; 3. Installation - FeiYu Tech Feiyu-WCP2 Manual

1. Overview

[1] Waterproof cover
[2] Securing ring
[3] GoPro adapter*
[4] Power button
[5] Thread hole for adapter
[6] 1/4 inch thread hole
[7] Recenter button
[8] Shutter button
*GoPro adapter [3] can be manually removed and install to thread hole[5]

2. Check

Check the waterproof performance before using for the first
time or has not been used for a long time.
Before placing the device into the waterproof case, mount on
the waterproof cover and completely tighten the securing ring
and dip the case into water with a depth of 30 cm for at least
10 mins. lf water seeps in, take it out and check the case.

3. Installation

(1) Select diving mode:
Pocket 2, slide down in home page and
choose "Diving mode"*, follow the tips to
operate the device, select "Power off" to
power off immediately, select "Later" , the
device will not auto power off, please
power off the device manually.
(2) Place in the device:
Feiyu Pocket 2 in diving mode, then place
it in the waterproof case.
[7]
[8]
Turn on Feiyu
Power off the
[4]
[5]
[6]
[1]
[2]
[3]