Advertisement
Available languages
Available languages
ENGLISH
Cleaning and Maintenance
•
Before cleaning the appliance, disconnect it from the outlet
and let it cool down.
•
To clean the outer shell, wipe it often with a soft sponge. For
very dirty parts, wipe with a sponge dipped in < 50°C water
and mild detergent, then dry the heater enclosure with a
clean cloth. Be careful not to let the water enter the inside of
the appliance.
Problem
Heating element does not glow red.
Do not feel heat or air flow.
DISPOSAL
This symbol on the product or its packaging indicates
that the appliance cannot be treated as normal
domestic trash, but must be handed in at a collection
point for recycling electric and electronic appliances.
Your contribution to the correct disposal of this product
protects the environment and the health of your fellow
men. Health and the environment are endangered
by incorrect disposal. Further information about the
recycling of this product can be obtained from your local
town hall, your refuse collection service, or in the store at
which you bought the product.
This regulation is valid only in EU member states.
WARNING : IN ORDER TO
AVOID OVERHEATING, DO
NOT COVER THE HEATER.
IF THE SUPPLY CORD
IS DAMAGED, IT MUST
BE REPLACED BY THE
MANUFACTURER OR ITS
SERVICE AGENT OR A
SIMILARLY QUALIFIED PERSON
IN ORDER TO AVOID A HAZARD.
HEATER IS NOT LOCATED
IMMEDIATELY BELOW A
SOCKET-OUTLET.
DO NOT USE THIS HEATER
IN THE IMMEDIATE
SURROUNDINGS OF A BATH,
A SHOWER OR A SWIMMING
POOL.
5
TROUBLESHOOTING
Cause
1.
Heating element is made of stainless steel and will
not glow red to produce heat.
1.
No power to heater.
2.
Heater is not on a solid surface. (ST-222A-240-E)
3.
Desired room temperature is reached.
Electric Fan Heater (ST-221A-240-E / ST-222A-240-E)
•
To protect the enclosure, do not splash water onto the
heater, and never use a solvent like gasoline, isoamyl acetate,
toluene, etc. to clean the heater.
•
Do not immerse the heater in water.
•
Wait until heater is dry before use.
1.
Heater is operating correctly.
1.
Check power connections / connect heater to power
supply. Main power indicator light should be on.
2.
The ST-222A-240-E is equipped with a tip-over
switch on the bottom of the heater. Make sure the
heater is on a solid surface.
3.
Thermostat will shut off once desired room
temperature is reached. Heater is operating correctly.
DO NOT THROW THE
APPLIANCE IN DUSTBIN WITH
WHEELS. DO NOT DISPOSE OF
ELECTRICAL APPLIANCES AS
UNSORTED MUNICIPAL WASTE,
USE SEPARATE COLLECTION
FACILITIES. CONTACT YOUR
LOCAL GOVERNMENT FOR
INFORMATION REGARDING
THE COLLECTION SYSTEMS
AVAILABLE. IF ELECTRICAL
APPLIANCES ARE DISPOSED
OF IN LANDFILLS OR DUMPS,
HAZARDOUS SUBSTANCES CAN
LEAK INTO THE GROUNDWATER
AND GET INTO THE FOOD
CHAIN, DAMAGING YOUR
HEALTH AND WELL-BEING.
IN ORDER TO AVOID
OVERHEATING, DO NOT COVER
THE HEATER.
THIS APPLIANCE CAN BE USED
BY CHILDREN AGED FROM
8 YEARS AND ABOVE AND
PERSONS WITH REDUCED
PHYSICAL, SENSORY OR
MENTAL CAPABILITIES OR
LACK OF EXPERIENCE AND
KNOWLEDGE IF THEY HAVE
BEEN GIVEN SUPERVISION OR
Solution
Advertisement
