Operation; Control Panel Operation; Menu Map - Chauvet DJ GigBAR MOVE + ILS User Manual

4. Operation

This product is not designed for continual use. Make sure there are regular breaks during operation to
maximize the life of the lasers. Always disconnect the GigBAR MOVE + ILS from power when not in use.

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Please refer to
the Product Overview to see the button locations on the control panel.
Button Function
<MENU> Selects an operation mode or backs out of the current menu option
<UP> Navigates upwards through the menu list or increases a selected numeric value
<DOWN> Navigates downwards through the menu list or decreases a selected numeric value
<ENTER> Activates a menu option or selected value

Menu Map

Refer to the GigBAR MOVE + ILS product page on
Mode Programming Levels
Program
AUTO
Mode
Speed
Spots XY Speed
Dimmer
Strobe
Program Time
Page 12
www.chauvetdj.com
Description
Mix 1–4 Sets auto mixed effects show
Spots 1 Selects moving heads auto show
Strobe 1 Selects strobe auto show
Laser 1 Selects laser auto show
Derby 1 Selects derby auto show
Par 1 Selects pars auto show
S+SP 1 Selects strobe and moving heads auto show
L+SP 1 Selects laser and moving heads auto show
LS 1 Selects laser and strobe auto show
D+SP 1 Selects derby and moving heads auto show
DS 1 Selects derby and strobe auto show
DL 1 Selects derby and laser auto show
P+SP 1 Selects pars and moving heads auto show
PS 1 Selects pars and strobe auto show
PL 1 Selects pars and laser auto show
PD 1 Selects pars and derby auto show
PS+SP 1 Selects pars, strobe, and moving heads auto show
PL+SP 1 Selects pars, laser, and moving heads auto show
PLS 1 Selects pars, laser, and strobe auto show
PD+SP 1 Selects pars, derby, and moving heads auto show
PDS 1 Selects pars, derby, and strobe auto show
PDL 1 Selects pars, derby, and laser auto show
DLS+SP 1 Selects derby, laser, strobe, and moving heads auto show
PLS+SP 1 Selects pars, laser, strobe, and moving heads auto show
PDS+SP 1 Selects pars, derby, strobe, and moving heads auto show
PDL+SP 1 Selects pars, derby, laser, and moving heads auto show
PDLS 1 Selects pars, derby, laser, and strobe auto show
Snap/Fade Selects the transition between auto programs
0–99 Sets automatic program speed
0–99 Adjusts the pan and tilt speed of the spots
0–255 Adjusts the dimmer
0–20 Selects the strobe
1–255 (seconds) Sets the program time
for the latest menu map.
GigBAR MOVE + ILS User Manual Rev. 3
Operation